What to Do if Xiaomi Freezes on MI Logo

Xiaomi phones work thanks steadily to up-to-date hardware and quality software. But sometimes users still encounter unpleasant situations, such as boot loop, “bricking” or complete freezing of the mobile device. Today let’s figure out what to do if your Xiaomi phone freezes on the Mi logo and the operating system won’t boot.

Why are phones with MIUI stuck?

First, you must find out why Xiaomi does not boot beyond the logo. There can be many reasons. Because of this, many people do not understand what to do next and how to resuscitate the phone. The main problems should include the following:

1. Incorrect reflashing. If an inexperienced user installs the firmware on the phone alone, he could make serious mistakes. For example, he/she chose a shell version unsuitable for his/her model. Or the procedure was interrupted due to an unexpected circumstance (the smartphone ran out of power, the power was turned off, etc.).
2. An important file was deleted or incorrectly edited. The phone owner cannot access the system folders and files by default. But the root right removes this restriction, which often leads to serious problems. Therefore, it is strongly not recommended to change Android and System folders. This also includes deleting system applications. Read here about what stock apps you can get rid of without harming your smartphone.
3. A serious virus has been infiltrated. Installing malicious software or downloading a dangerous file is quite real, although viruses are rare on Android smartphones.
4. Mechanical damage. Breakage due to physical impact is easy to identify visually (broken screen, cracked casing). But if the smartphone was dropped from a small height or a liquid got into it, only the internal elements may be damaged.
5. The battery is out of order. If the battery has been in use for more than two years, it is possibly completely worn out and, consequently, Xiaomi freezes on the logo or boot loop. In this case, you need to replace the battery.

How to repair Xiaomi if it freezes on the logo

Below will be practical recommendations and instructions to get your smartphone back in working order. Use the article for familiarization purposes only! We are not responsible for any consequences!

Reset to factory settings

This is one of the fastest and most effective ways. The procedure can be done both in system and custom recovery.

System recovery

Let’s take a look at operating the stock software package.

1. Turn off the smartphone and wait for about a minute.
2. Press the power and volume up buttons. Release the volume knob when the smartphone logo appears. If you can’t access the recovery this way, hold down the two keys until you enter the menu.
3. Click “Wipe Data ” – “Wipe AII Data”. Move through the lines with the physical buttons.
4. Then press “Reboot”. The mobile device will reboot. It is possible that after this, the operating system will boot normally.

Custom recovers

It is possible to reset the smartphone to the factory settings through the custom recovers.

1. Entering is done similarly: hold the power button and volume+.
2. In the menu, click on the gray tile “Wipe”.
3. At the bottom, tap “Selective Wipe”. Check the “Dalvik/ART Cache“, “Data“, “Device Memory” and “Cache“ files. In no case do not touch the “System” section.
4. Swipe to the right to confirm.
5. Return to the previous menu and click “Reboot”.

Restoring the last copy

This method may work if you’ve backed up your system before your Xiaomi phone stuck on the Mi logo.

1. Go into TWRP Recovery and do a factory reset using the above instructions.
2. In the initial menu, click “Restore”.
3. Specify the path to the backup file.
4. Wait for the procedure to complete.
5. To avoid any further problems, disable the MIUI update.

Installing the firmware

If Xiaomi is stuck on the logo after flashing, it means that the reason is the wrong operation. The only option is to re-flash. We recommend immediately contacting the service center for newcomers, but if you have the technical skills, you can try to put the shell yourself.

Official MIUI version

The official global firmware can boast of stable operation, the absence of malware, and frequent updates. It is worth reflashing the smartphone through the reliable utility Mi Flash Tool (you must enter Fastboot mode). In this article, we described how to put the firmware through Fastboot. Now let’s briefly describe the main points:

1. Download MIUI ROM Flashing Tool on your PC.
2. Install adb and fastboot drivers. Disable the digital signature of the drivers (optional).
3. Unlock the bootloader on the smartphone.
4. Download the firmware for Fastboot from the Mi Community forum. Be careful and choose the right version for your model.
5. Disconnect the phone and put it into Fastboot mode by pressing the Power and Volume down buttons for a few seconds.
6. Using the original USB cable, connect a phone to PC.
7. Unpack the firmware file.
8. Launch Mi Flash and perform the final actions. Using the button “Select” we specify the path to the firmware. Click “Refresh” to define the device. Delete all the previous data from the smartphone by clicking “Clean all”. Initiate the flashing process by pressing “Flash” button.
9. Disconnect the phone from the PC when “Success” message appears.

If everything were done correctly, the smartphone would restart several times, and then the operating system will self-start. During this period, don’t perform any actions with the phone. Wait. It is strictly forbidden to turn off or restart the device manually.

Custom Version

Custom firmware is created by one developer or group of users. Custom is a modified version of the official shell. The pluses include additional interesting features (such as unlocked root rights), the lack of unnecessary applications, and the ability to customize the system design fully. The disadvantages are unreliability, the danger of introducing a virus, or losing personal information.

Download custom firmware only from a trusted source. The XDA forum is ideal. Look for suitable custom versions in the section with your model.

The best way to install a modified shell is through TWRP Recovery. There is a step-by-step instruction in a separate material. The main steps are as follows:

1. Download the appropriate version.
2. Put the smartphone in recovery mode.
3. Format all the items. MicroSD and USB OTG can not be touched.
4. Click the ” Install ” tile.
5. Choose the path to the firmware archive. Confirm the action. The smartphone might reboot several times, just wait.

Entering safe mode and removing viruses

Sometimes the phone does not boot beyond the logo due to a malicious file or application. If you downloaded any suspicious material before the problem, you must put your phone into safe mode and check its performance.

1. Turn off the phone by long pressing the power button.
2. Please turn it on again, and press the volume down key as soon as the device starts up. Keep it pressed for 20-30 seconds. The operating system may boot, and “Safe Mode” will appear at the bottom.
3. Go to Explorer and delete all the files that you have downloaded recently.
4. Open the Security app and scan for viruses.
5. Reboot the device. There is a chance that the smartphone will now work properly.

Please note! This method works only in 30-40% of cases, but you should still try it.

Repairing mechanical damage

If the phone does not turn on due to mechanical damage, only repair will help. As soon as possible, take the mobile device to the service center. Newcomers are not recommended to disassemble the device at home or fix or replace any parts. It can only aggravate the failure.

Most often, the smartphone froze on the logo because of the liquid. In this case, use our article on the subject. Experienced users can disassemble the smartphone themselves and dry the parts.

FAQ

What is the difference between bootloop and logo freeze?

Bootloop is a persistent reboot that prevents the operating system from booting up. A bootloop usually occurs for the same reasons as a logo hang. The troubleshooting methods are also similar.

What to do if your smartphone stops booting after a firmware update?

Try to restore the backup using the instructions from this article. If that doesn’t help, roll back to a previous version of Myuai. Be sure to unlock the bootloader. Otherwise, you’ll get a “brick”.

Is it possible to restore the smartphone if it does not turn on?

The condition when the mobile device does not display even the logo is called a “brick”. Reanimating the phone at home is quite difficult. There is only one working option – flashing through EDL by shorting the TestPoint pins.

Is Fastboot good for installing custom firmware?

Yes, it’s possible to flash the phone to the modified version via Fastboot. But errors and crashes are not excluded, so most users are still advised to use TWRP Recovery.

We told you what to do if the logo gets stuck on Redmi and Xiaomi. Many effective ways will help restore the normal function of the smartphone. If anything is unclear, ask for help in the comments.